Installing an ECB-1 Gauge on a Turbo New Edge Mustang

March 9, 2017 / by Evan Smith

The ability to monitor boost, air/fuel ratio, ethanol content, and ethanol temperature is exactly what this New Edge Mustang needed. Check out the install here.

The combination of EFI and forced induction presents enthusiasts with endless possibilities in regards to output and drivability. Throw in a quality wideband 02 sensor and you can have upwards of 1,000 or more streetable horsepower. Running boost also means increased cylinder pressure and a narrowed window for tuning, so you it’s important to keep tabs on your engine’s vitals. This is especially important if you’re running pump gas, as you can expect inconsistencies in gasoline, even if you fill up at the same station.

This 2003 turbo’d Terminator was the perfect recipient for the ECB-1 gauge. It runs a fully built 4.6L DOHC with a massive, intercooled TK turbo. Out is 750 RWHP on pump gas and over 1,000 or race fuel. The Cobra is predominately street driven, so it’s nice to know the quality of the fuel.

If you truly want to reap the rewards of your boosted combination—this gauge is a must. It used to be enough to accurately monitor air/fuel ratio, but the new ECB-1 Ethanol Content and Air/Fuel ratio gauge from Innovate Motorsports adds another element of monitoring engine vitals, and thus, more options for tuning. The ECB-1 Ethanol Content and Air/Fuel ratio gauge kit does the hard work for you by monitoring (and recording), ethanol content percentage, fuel temperature, boost pressure, and wideband air/fuel ratio.

ECB-1 Ethanol Content and Air/Fuel ratio gauge kit (PN 3906) comes complete with everything you’ll need. The kit can also be ordered without the Ethanol Sensor (PN 3911).

Innovate Motorsports offers a variety of wideband-equipped gauge kits, and this one incorporates the popular Bosch LSU 4.9 wideband O2 sensor along with a 4 BAR MAP sensor with a pressure range of -29 inHG to 43.5 PSI (-1 to 3 BAR), a great-looking gauge with face and bezel options and it has a multitude of extra features.

The gauge designed with a clear, easy-to-read digital display that is user configurable to display one, two, or four channel viewing modes that you scroll through with the push of a button. And you don’t need a PC to download your information either. The kit is also universal, so you can be adapted to virtually any vehicle.

One of the key components is the Ethanol sensor that is installed in-line on the feed side of the fuel system. If you're running larger than a -6AN feed, running it on the return side is recommended.

“The Ethanol Advanced gauges combine our patented DirectDigital O2 sensor control technology with application specific sensors, an OLED display, and a sophisticated ethanol content sensor that also measures fuel temperature,” Felipe Saez at Innovate Motorsports. “These capabilities allow the user to monitor and capture critical metrics for accurate and reliable tuning while operating with high ethanol content fuel.”

It’s important to note the wideband O2 is compatible with several fuel types (Leaded, Unleaded, Diesel, and E85 to name a few), and the unit offers the ability to calibrate the O2 sensor for maximum accuracy. You can install the 02 in an existing bung as long as it's 1-inch in length, but in case your vehicle is not equipped with one, the kit includes a bung that can be welded into the exhaust.

Next we installed the Bosch LSU 4.9 wideband O2 sensor. The kit comes with a bung that can be installed, fortunately, out Cobra Mustang already had one fitted to the downside of the exhaust. On turbo applications, make sure the sensor is at least two feet away from the exhaust housing. The kit utilizes Innovates Patented DirectDigital technology for wideband sensor control, which is 100-percent digital wideband air/fuel ratio technology.

The gauge measures 52mm (2 1/6-inch) so it fits in most aftermarket gauge pods. In addition, it comes with interchangeable black and silver faceplates and bezels that are very clean and modern looking.

It’s actually pretty amazing how much capability is packed into that 2 1/16-inch gauge. Working with the previously mentioned sensors, the system utilizes what Innovate Motorsports calls “Boost Vision” which is a real time calculated approximation of your ECU’s boost limit based on current ethanol content percentage. This is a major safety factory that can prevent detonation should it predict an overboost situation.

Our subject was fitted with an aftermarket dual gauge pod that housed fuel pressure and volts. We ditched the volt gauge, and replaced it with the Innovate Motorsports ECB-1.

The unit can also monitor and record ethanol percentage, vacuum and boost, it can also be programmed to look for Target Boost, Peak Boost, Fuel Temp, and Air/Fuel ratio. The user can program a Warning Indicator LED for situations when actual boost level exceeds your target boost. And there is on-screen error reporting for ethanol content sensor and wideband O2. Ideally, you’ll set up the aforementioned functions to work with the three-configurable analog outputs that can be tied to standalone and other programmable ECU’s as well as external data loggers.

Wiring the gauge is amazingly simple. There are a few hard-wired connections to make, the rest is plug and play. Another impressive feature is the MTS serial in/out that’s designed to be used with other Innovate and/or other aftermarket MTS-enabled devices, which allows you to add extra data-logging channels.

Armed with the kit, we were excited to put this gauge system to the test. Our recipient is this amazing 2003 SVT Cobra Mustang that featured a fully built 4.6L DOHC engine with forced induction coming from a 82mm turbo. The boosted Stang puts down over 750 hp on pump gas and can crack 1,000 with race fuel in the tank (along with more timing and boost).

But while drivability is really nice on the Ford Mustang, and E85 is available where the car is located, there’s always a chance the fuel may differ slightly from station to station. Using the ECB-1 will enable the owner to keep a close eye on performance and keep the car running at its potential.

023.jpeg

The ECB-1 gauge kit can be configured to read in °F or °C, AFR or Lambda, inHG, PSI, kPa, or BAR. It also displays fuel temp: 0v = -40 °F, 5v = 257 °F (-40-125°C). In addition, pressure readings can be adjusted for differences in altitude which is pretty slick and necessary for accurate tuning. Wideband Air/Fuel Ratio read out is shown and the range is as follows: 0v = 7.35, 5v = 22.39 AFR (0.50-1.52 Lambda). There is also a Peak Hold function.

Topics: FORD, featured, TUNING TECH

Related posts

Evan Smith

Written by Evan Smith

NEVER MISS A POST

IM-youtube-ad.jpg